Connecting to a Computer
68
Connecting to a Computer
Connecting to a Computer
PC Connection Diagrams
Terminal on the Camcorder
1
Output connection (Signal Flow
DV capture board.
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
2
Output connection (Signal Flow
USB port.
Connecting Cable
) to a computer with a DV (IEEE1394) terminal or a
DV Cable
(Commercially available)
) to a PC or PictBridge compatible printer with an
USB Cable (Supplied)
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
USB Terminal
Open the terminal cover to
access.
Terminal on the Connected
Device
4-pin
6-pin*