Advertisement
The following adjustment options are possible:
1. Automatic Memory Search function - On or Off.
Use the Channel up/down button to select between the 2 options by highlighting the desired
selection. Then press the Select button to enter the option.
2. Clear all Memory Locations. Press the Select button; a prompt display screen appears
confirming -
Are You Sure? Select
Time Based Features
The following adjustments are possible:
Clock
Alarm Clock
Program Alert
Auto Shutdown
Sleep Mode
Upon entering this mode, press the Channel up/down button to highlight the desired function and press
the Select button.
NOTE: No button activity for 10 seconds will also exit the desired (highlighted) function.
Clock
When entering this menu option, you can set up the clock shown on the default display, based on the
format desired, the time zone in which you reside and Daylight Savings Time, if used. The clock data is
provided via the Sirius stream, and will update based on the received signal.
Format:
The clock format option provides:
12 Hour (Default)
24 Hour
Use the Channel up/down button to highlight the desired for mat and press the Select button.
Time Zone:
The Time Zone option provides:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as GMT-3:30 Newfndlnd)
Use the Channel up/down button to highlight the desired time zone and press the Select Button.
Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST;
press the Channel up/down button to toggle between DST Observed (default) or DST Not Observed.
NOTE: When the shuttle has not been turned on or has been removed from the docking port for
any length of time be sure to position the antenna toreceive the satellite signal so the time can be
automatically updated. If the time information has been lost, the shuttle will not display the time
Yes
or
No
and press the Select button.
12
Advertisement
