Troubleshooting - NOMA 043-8416-2 Instruction Manual

8
MODEL: 043-8416-2
If your heater fails to operate, please follow these procedures prior to contacting
Customer Service.
Problem
The heater does not
operate or has shut
o unexpectedly.
The room is not hot
enough.
CAUTION: Please do not attempt to open or repair the heater yourself. Doing so
may void the warranty and could cause damage or personal injury.
Cause
There is no power going
to the appliance.
One of the safety
protection devices has
been activated.
The set temperature is
lower than the current
room temperature.
The room temperature
has reached the
temperature set on the
thermostat.
The window is open.
The set temperature or
power setting is too
low.
The room is too large.
Solution
Ensure the heater is plugged in and
the electrical outlet is working.
Check that the heater is in an
upright position.
Check for any obstructions. If you
find an obstruction, turn the heater
o , unplug the heater and wait at
least 10 minutes for it to cool down.
Carefully remove the obstruction.
Plug the heater in and restart it as
described in the OPERATING
INSTRUCTIONS section.
If the heater does not restart,
unplug the heater and have it
checked by an authorized service
centre.
Set the desired temperature higher
than the current temperature to
restart the heater.
It is normal for the heater to turn
o . The heater will restart once the
room temperature falls below the
set temperature.
Close the window.
Increase the desired temperature
setting or increase the power
setting.
Use more portable heaters or
choose one with a larger capacity.