Table of Contents
Advertisement
NL Dishwasher detergent
Set rinse aid amount
If streaks or water spots remain on
the dishes, adjust the amount of rinse
aid.
on
to press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
a The display shows Hxx.
a The display shows
to give.
Just as often on
3.
until the display shows the
factory-set value r05.
Press as many times until
4.
the desired amount of rinse aid
has been set.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
To save the settings, press for
5.
approx. 3 seconds.
Switch off the rinse system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with rinse aid
26
rinse aid component, you can switch
off the rinse aid system.
Tip: The function of the rinse aid is
limited in combined detergents. You
usually get better results by using
rinse aid.
Busy-
1.
2.
reflected
a The display shows Hxx.
to press
a The display shows
3.
4.
5.
a The rinse aid system is
V
Suitable dishwasher detergents
Only use detergents that are suitable
for the dishwasher. Suitable for both
non-combined and combined
dishwashing detergents.
For optimum washing and drying
results, use a non-combined
detergent in combination with
separate "softening salt"
→ Page 23 and "rinse agent"
→ Page 25.
Modern, powerful dishwasher
detergents usually have a low alkaline
recipe with enzymes. Enzymes
on
to press.
Approx. 3 seconds on
to access the basic settings.
to give.
Press just as often
until the display shows the
factory-set value r05.
Press as many times until
the display shows r00.
To save the settings, press for
approx. 3 seconds.
switched on and the rinse aid
refill indicator is deactivated.
detergent
Busy-
Advertisement
Table of Contents
