Kubota WG972-E4 Operator's Manual page 19

Gasoline
1*. Turn the fuel selector switch* to the
"GASOLINE" position.
NOTE:
*The step 1 above is for GL type only.
*The fuel selector switch is not provided by KUBOTA.
3. Insert the key into the starter switch and turn it to the "ON" ( ) position.
4. Check to see that MIL (Malfunction Indicator Light) is ON.
5. Turn the key to the "START" position and the starter will begin turning. Release the key
immediately, when the engine starts.
6. Check to see that MIL (Malfunction Indicator Light) is OFF.
If not, immediately stop the engine and check the cause.
7. Warm up the engine at medium speed running for 3 to 5 minutes.
A Be sure to warm up the engine not only in winter but also in other warmer seasons.
A In case of converting the fuel (gasoline
engine speed high and no-loaded. If you convert the fuel with the engine speed low, the engine will stop.
(A) "OFF"
(B) "ON"
(C) "START"
LPG) while running the engine, the engine should be operated with the
OPERATING THE ENGINE
LPG (CNG)
1. Open the liquid withdrawal valve of the
LPG fuel tank (or CNG tank).
2*. Turn the fuel selector switch* to the
"GASEOUS" position.
NOTE:
*The step 2 above is for GL type only.
*The fuel selector switch is not provided by KUBOTA.
7