Technical Data; Included In Delivery; General Safety Notes - EINHELL LE-SS 150 Operating Instructions Manual

Anleitung LE-SS 150 SPK1
GB
Please read these operating instruc-
tions carefully with particular attention
to the safety notes. Always store these
operating instruccions together with
the vibrating grinder.

Technical data

Voltage 230 Volts ~ 50 Hz
Power consumption 150 Watts
Grinding surface area 187 x 90 mm
Sandpaper size 240 x 90 mm
Vibrations per minute 11.000
Sound pressure level LPA 84,2 dB(A)
Sound power level LWA 97,2 dB(A)
Vibration a w < 2,5 m/s 2
Weight 1,4 kg
II / ®
Totally insulated

Included in delivery

LE-SS 150,
Dust extraction connector
Operating instructions

General safety notes

– Always remove the plug from the power
supply socket before carrying out any
maintenance or repair work such as
cleaning the sander or changing the
sandpaper!
– Always disconnect the machine by
removing the plug from the socket, not
by pulling on the mains cable.
– Always wear safety goggles and dust
mask when working.
– Keep the workplace clean and well illu-
minated.
– Ensure that the workpiece is sufficiently
secured so that you are able to work
safety and effectively.
– Keep children away from the machine.
– Always keep your machine clean, and
check for possible defects of damage
after every job.
– Always ensure that the switch is swit-
ched off before you insert the plug into
the power supply socket.
– Ensure that any platforms you are wor-
king on are sturdy and stable.
– If the machine is damaged, use the
exploded diagram and the spare parts
list to determine the precise cause of
the damage, and order any neccessary
parts from Customer
Service.
– The pad sander is not designed for wet
sanding.
Note!
Always wear safety goggles and a dust
mask.
4
22.09.2005 11:40 Uhr Seite 4
1 Front gripp
2 On/Off trigger
3 Locking button
4 Main grip
5 Vacuum cleaner
6 Vibration plate
7 Clamping device
Attaching the dust extraction
connector
Note!
For health reasons, you must use a dust
extraction device.
On/Off switch
On: Press trigger 2.
Continuous Lock trigger 2 with locking
operation: button 3.
Off: Briefly depress trigger 2.
attachment