Summary of Contents for Campania International Vicobello FT-114
Page 1
FT-114 Vicobello Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 21 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
FT-114 Vicobello Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-114 Vicobello Fountain Assembly Instructions Step 8 - Position the medium pedestal (FT-305C) over the pump in the large bowl (FT-114G). Step 9 - Feed the non-kink tubing connected to the pump through the top of the medium pedestal (FT-305C). FT-305C (52 lbs) 13"W x 14.25"H Step 10 - Using a hose clamp, secure the loose end of the 20"...
Page 4
FT-114 Vicobello Fountain Assembly Instructions Step 18 - Place the pump cover door (FT-114F) into the medium pedestal (FT-305C). Step 19 - Fill the fountain with water. FT-114F (3 lbs) 5.25"L x 2"W x 4"H rev 5/14/2020...
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.