Advertisement
4
Installing the Discharge
Plate
Parts needed for this procedure:
1
Discharge plate
1
Carriage bolt (5/16 x 7/8 inch)
1
Flange nut (5/16 inch)
2
Flange nut (3/8 inch)
2
Carriage bolt (3/8 x 1 inch)
Procedure
1.
Install the discharge plate to the outside of the
mounting bracket with 2 carriage bolts (3/8 x
1-1/4 inches) and 2 flange nuts (small flange)
(3/8 inch) as shown in
2.
Install the tab to the inside of the mower deck
with 1 carriage bolt (5/16 x 7/8 inch) and 1 flange
nut (5/16 inch) as shown in
Figure
2.
Figure
2.
1. Carriage bolt (3/8 x 1 inch) 4. Carriage bolt (5/16 x 7/8
2. Discharge plate
3. Flange nut (3/8 inch)
4
Figure 2
inch)
5. Flange nut (5/16 inch)
6. Ensure that the tab is
positioned inside the
mower deck.
g017822
Advertisement
