Components Location - Optika SM Series Quick Manual

5 Operating

5.1 Components location

5.2 Connection balance and electronic box
5.3 Connection between power supply and electronics box
- As a first step place Pan Support (1) on
balance cone
- Lay Weighing Pan ( 2 ) on pan support and
check the pan is placed properly.
3
- Put Antiventilation ring ( 3 )
2
1
- Insert plug connection cable into jack of
electronic box.
- Fix the connector screwing the two side screws.
- Connection to network is made through an
external power supply.
- Insert power supply connector in DC plug
placed on electronics box.
- Use ONLY power supply provided with the
balance.
7