Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Owon AC211
Summary of Contents for Owon AC211
- Page 1 AC211 Split A/C Control Quick Start Guide...
- Page 2 Welcome The Split A/C control AC211 converts the home automation gateway’s ZigBee signal into an IR command so as to control the air conditioner in your home area network. It has pre-installed IR codes used for main-stream split air conditioners . It can detect room temperature and humidity as well as the power consumption of the air conditioner, and display the information on it's screen.
-
Page 3: Get To Know Your Device
Get to know your device ON/OFF button ON/OFF Button • Reset. Press and hold the on/off button for about ten seconds until the screen displays "rst" to reset the device to default factory setting. LED indicator IR transmitter Screen LED indicator The LED status gives the following information: LED status What it means... -
Page 4: Get Started
2. Tap "Pair" on the right of the AC icon. 3. Follow the on-screen instructions to complete the pairing process. 4. Verify the pairing result by tapping the “verify”, save the result if AC211 works properly with your AC conditioner. -
Page 5: Technical Specifications
Technical Specifications • ZigBee 2.4 GHz IEEE 802.15.4 Wireless connectivity • IR • Operating frequency: 2.4 GHz • Internal PCB Antenna • Range outdoor/indoor: 100m/30m RF Characteristics • TX Power: 6~7mW (+3dBm) • Receiver sensitivity: -102dBm • Home Automation Profile ZigBee Profile •... -
Page 6: Safety Handling
Safety Handling WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Split AC Control and other property. Read all the safety notices below before using the Split AC Control. • Avoid high humidity or extreme temperatures. •...
Need help?
Do you have a question about the AC211 and is the answer not in the manual?
Questions and answers