English ELEMENTS OF THE MONITOR.- START/STOPING.- A: The electronic monitor has 1 TFT Plug the unit into a wall socket with an display including touchscreen. EARTH terminal and set switch (L) to position (1), Fig.1. B: Incline function quick access keys The safety key (g) must be inserted or buttons (2- 4- 6- 8- 10- 12- 15).
CHANGING FROM MODE option. Fig. 9. Select the program and the duration of KILOMETRES TO MILES.- the program at the top of the screen. On the main screen, click on Settings, then select MIL SWITCH option and Program graphics for P1 to P36. choose the unit system.
HRC (Heart Rate Control).- distance or calories. You can switch between them by sliding your finger to This program allows you to do the sides and change the value by exercise on the machine at a constant sliding your finger vertically. Press user-defined pulse rate.
ELEVATION.- PULSE MEASUREMENT.- inclination function operates independently of all other functions. Your pulse rate is measured by Each time that you set switch (L) to placing both hands on pulse sensors position I, as described in the Starting (R) with which the electronic unitis section, Fig.1.
Page 9
FAULT FINDING CHART PROBLEM CHECKS SOLUTIONS 1.The monitor does not 1) Make sure that the 1) Plug the machine into the switch on. machine is plugged in, the mains supply. Set the switch to ON/OFF switch in position 1 position 1 and insert the safety and that the safety key is key.
Page 10
PERFILES DE LOS PROGRAMAS (GB) PROGRAM PROFILES PROFILS DES PROGRAMMES PROGRAMMPROFILE PERFIS DOS PROGRAMAS PROFILI DEI PROGRAMMI (NL) PROGRAMMAPROFIELEN...
Page 11
Tel.: +351 234 729 510 902 170 258 Fax: +351 234 729 519 Fax: +34 945 56 05 27 e-mail: info@bhfitness.pt e-mail: sat@bhfitness.com BH FITNESS NORTH AMERICA BH FITNESS MEXICO BH FITNESS UK 20155 Ellipse BH Exercycle de México S.A. de Tel: 02037347554...
Need help?
Do you have a question about the G6485TFT and is the answer not in the manual?
Questions and answers