Table of Contents
Advertisement
Delay End
Use this function to automatically start and finish the
appliance after a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set a required
time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Wi-Fi f
When WLAN is connected, the Wi-Fi icon on the
control panel is lit.
Add Item
Use this option to add or remove the laundry after
the washing programme is start.
1
Press the Add Item button when the LED is
turned on.
2
Open the door after it unlocks itself.
3
Add or remove laundry.
4
Close the door and press the Start/Pause
button.
28
Pre Wash d
Use this option to wash the heavily soiled laundry.
1
Press the Power button.
2
Select a washing programme.
3
Press the Pre Wash button for 3 seconds.
4
Press the Start/Pause button.
Child Lock i
Use this function to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked, CL and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add Item
button for 3 seconds.
• A beeper will sound, and CL will appear on
the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add Item
button for 3 seconds to deactivate this function.
EN
Advertisement
Table of Contents
