Timer Operations - Everbrite Electronics All American Scoreboards MP-7499 Operator's Manual

2.3 Timer Operation
The MP-7499 has two timers that can be set for up to 99 seconds. These timers will always display the
same time. Use or
SET
1
Example: Set TIMER 1 to 45 seconds
1. Time must be set to OUT by pressing
be set until TIMER 1 counts down to 0.
2. Press .
SET
1
3. Press then press
4 5
4. Repeat steps for TIMER 2 using the
To start the timer, press
To reset a timer, press
RESET
The MP-7499 counts down by default. To change the timer to count up, stop the timer and press
If a time other than the original time is needed, follow the following example.
Example: Timer is stopped at 23 seconds, but needs to be reset to 24 senconds.
1. Swith the TIME to OUT by pressing
2. Press then
2
EDIT
3. Swith the TIME to IN by pressing
If the game time remaining is less than the delay of game time, press
the MP-7499 will turn off. NOTE: The timer on on the LCD screen of the console will continue to count
down.
to set the two different timers according the following example.
SET
2
IN
. If timer is set to IN (timer is counting), TIMER 2 cannot
OUT
.
ENTER
button.
SET
2
IN
. To stop the timer, press
OUT
or . The respective timer will reset to original set time.
RESET
1 2
IN
.
OUT
then press
4
ENTER
IN
when time is resumed.
OUT
IN
again.
OUT
.
BLANK

UP
.
DOWN
and the TIMER LEDs on