1.0 Keypad Console
The Keypad Console has a touch sensitive keypad that allows the operator to enter all pertinent informa-
tion, It then sends the information to the Controller Assembly within the sign by way of radio signal or
hard-wire. A LCD screen displays the information that is being sent to the Timer. The Keypad you have
will depend on the model of Scoreboard and interface system you have. If a Keypad Slipsheet needs to
be replaced, printable slipsheets can be downloaded from www.allamericanscoreboards.com.
cauTIon: To protect the control from damage, it is advisable to disconnect
the control and store in a dry secure area when not in use.
2.0 Console Keypad Functions
Turn On the Keypad console press
When the Console Keypad is turned on, the LCD screen should become active.
.1 Initializing the system at every start-up.
To configure your console to function with the 7499 Game Timer, locate the CODE on the Keypad console
(upper right corner in Figure 2); the code 67 is used for illustration. Press
. This step is required each time the console is turned on.
ENTER
. dimming operation
The LED intensity can be adjusted by pressing
through the different brightnesses.
ON
OFF
SET
UP
SET
RESET
1
DOWN
2
1
1
2
3
BLANK
4
5
6
DIM
7
8
9
0
CODE
ENTER
IN
OUT
7499 / 67
Figure 2
once to turn on and again to turn off.
ON
OFF
. Multiple presses of the "DIM" button will cycle
DIM
RESET
2
HORN
then
6
CODE
then
7