Page 4
OPERATION INSTRUCTIONS To open tool squeeze handles hard or push release lever ( Fig- ) forward while squeezing handles to relieve tension. ure 1 Figure 1 1. Place the sleeve on the cable and make a loop around the item to which you are securing the cable. 2.
Page 5
SWAGER MAINTENANCE AND ADJUSTMENT Your Loos & Co. LOCOLOC® Swager has been designed to give you years of trouble-free service. To obtain the best pos- sible performance, we recommend: 1. clean and lubricate all four hinge pins regularly; 2. keep all bolts and screws tight. Figure 2 Tool adjustment - Use screw driver in slot of nut ( Figure 2...
Page 6
OPERATION INSTRUCTIONS Figure 4 Place sleeve to be compressed in cavity of swaging tool. Length of cable equal to the cable diameter should extend beyond length of sleeve to achieve maximum holding. (See arrow in Figure 6 Figure 5 Keep jaws of swaging tool at right angles to the sleeve to be compressed, making sure the sleeve is aligned in the jaw cavity.
Page 7
OPERATION INSTRUCTIONS Finished sleeve should look like this. Be sure sleeves have been compressed the proper number of times Figure 6 Use swaging gauge provided with the tool to check proper after swage diameter. Compressed sleeve should slide freely into 3/32 slot of gauge. Figure 7 www.loosnaples.com Toll Free: 800-321-LOOS (5667)