Disassembly - Pioneer PDP-504PE Service Manual

1

7.1.10 DISASSEMBLY

Rear case (50P), Front case Assy (50P)
1
A
1
Remove the grip by removing the 4 screws.
2
Remove the 12 screws (B tight).
3
Remove the 16 screws (M screws).
Note: At the time of a re-assembly,
please attach after fixing a positioning
hole previously.
4
Remove the rear case (50P).
B
5
Remove the 3 screws (B tight).
6
Remove the flexible cable (J211) from the PANEL KEY Assy.
7
Remove the front case (50P).
C
Note:
As the screws used for the front case are B tight (ABZ30P100FZK)
and other screws used are M screws (AMZ30P060FZK), care must
be taken not to use the screws in the wrong places.
• When only the front case Assy (50P) is removed
D
2 → 5 → 6 → 7
• Notes when reassembling the rear case (50P)
E
Flat clamp
Flexible cable
(J211)
A flexible cable
F is put on a gasket.
68
1
2
2
1
Grip
1
2
3
2
Wire B
(J106)
Care must be taken that the
wires do not protrude from
the front chassis.
2
3
Rear case (50P)
3
×3 2
3
×2
∗1
3
×2
3 2
3
×2
2
7
Front case Assy (50P)
PDP-504PU
3
4
3
2
3 3
×3 ×2
4
∗1
2 3
3
×5 ×2
2
6
×3
PANEL KEY
Assy
5
3P Housing wire
Flat clamp
with housing
(J108)
Housing wire (50)
with power (J110)
Pass J108 through under J110.
Care must be taken that the
wires do not protrude from the
front chassis.
4
2
1
Grip
1
2
3
2
×2