Estate Design EFW-XB24B Owner's Manual

Estate Design EFW-XB24B Owner's Manual

Electric fireplace insert

Advertisement

ELECTRIC FIREPLACE INSERT
Models: EFW-XB24B
For use with Mantel Model Nos.
OWNER'S MANUAL
WARNING! Read and understand this entire owner's manual, including all safety
information, before plugging in or using this product. Failure to do so could result in
fire, electric shock, serious personal injury, or death.
Only use this heater as described in this manual. Any other use is not recommended
by the manufacturer, and may cause fire, electric shock, or other personal injury.
WARNING! INDOOR use only! NEVER use this heater outdoors!
CAUTION! Keep this owner's manual for future reference. If you sell or give this product
away, make sure this manual accompanies this product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EFW-XB24B and is the answer not in the manual?

Questions and answers

Summary of Contents for Estate Design EFW-XB24B

  • Page 1 ELECTRIC FIREPLACE INSERT Models: EFW-XB24B For use with Mantel Model Nos. OWNER’S MANUAL WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, serious personal injury, or death.
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION! WARNING  Read all instructions before using the heater!  DO NOT USE OUTDOORS!  DO NOT run power cord under carpeting. DO NOT cover power cord with throw rugs, runners, or similar coverings. DO NOT route power cord under furniture or appliances. Arrange power cord away from traffic area, and where it will not be tripped over.
  • Page 3 WARNING  Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!  ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.  ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace.
  • Page 4: Parts And Hardware

    Preparation This product includes a GLASS! Always use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. Remove all contents from the carton and place them on a clean, soft, dry surface. Check to make sure nothing is missing.
  • Page 5 The wall mount fasteners included with this fireplace are for use ONLY with a NOTICE wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder blocks, or other wall types, consult a professional for the best attachment methods. ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating.
  • Page 6: Pedestal Assembly

    ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could result in electric shock, fire, or personal injury. NOTE: We recommend that two capable adult perform this procedure. STEP 5. With the help of a capable adult, lift the fireplace and align the two hooks on the back of the fireplace with the slots on the wall bracket.
  • Page 7 This next step involves GLASS! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. ALWAYS keep the decorative glass OUT OF REACH OF CHILDREN! Leave no glass pieces where children can find them. Failure to do so could cause a choking hazard. NOTE: We recommend that two capable adult perform this procedure.
  • Page 8 BUTTON ACTION and INDICATION CONTROL PANEL 1. Press ON (l). Power turns on. All functions are enabled. 2. Press OFF (O). Power, flame effect, and all functions turn off. 1. Press once. Flame effect and indicator turn on. POWER 2. Press again. Power and all functions turn off. 1.
  • Page 9 Remote Control (Control panel POWER switch must be ON to use remote control.) BUTTON ACTION and INDICATION REMOTE CONTROL 1. Press once. Flame effect turns on High and indicator light turns on. 2. Press again. Power and all functions turn off. POWER 1.
  • Page 10: Care And Maintenance

    Temperature Limiting Control This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the heater will automatically turn OFF. To reset: 1. Unplug the power cord from the outlet. 2. Turn the ON/OFF switch on the CONTROL PANEL to OFF. 3.
  • Page 11 Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.
  • Page 12: Limited Warranty

    Limited Warranty Manufacturer warrants this product for replacement or repair of parts to the original purchaser for a period of 1 (one) year from the original date of purchase. The original dated sales receipt is required for all warranty claims. This limited warranty does not cover replacement of glass or light bulbs, shipping costs, and normal wear and tear.

Table of Contents