Resending Faxes (Redialing Busy Number) - Canon E4500 Series Online Manual

Resending Faxes (Redialing Busy Number)

There are two methods of redialing: Automatic redialing and Manual redialing.
• Automatic Redialing •
If you send a document and the recipient's line is busy, the printer will redial the number after a specified
interval.
Automatic Redialing
• • Manual Redialing
You can redial to the recipients dialed using the Numeric buttons.
Manual Redialing
Important
• • It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect
registration of fax/telephone numbers. When you send important documents, we recommend that you
send them after speaking on the telephone.
Sending Fax after Speaking on Telephone
Note
• • Automatic redialing is enabled by default.
• • For details on the basic sending operations:
Sending Faxes by Entering Fax/Telephone Number
Automatic Redialing
You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the
maximum number of redial attempts and the length of time the printer waits between redial attempts.
Enable and specify the automatic redialing setting on Auto redial in Adv. fax settings under Fax
settings.
Adv. fax settings
Important
• While automatic redialing, the unsent fax is stored in the printer's memory temporarily until the •
sending fax is complete. If a power failure occurs or you unplug the power cord before automatic
redialing is complete, all faxes stored in the printer's memory are deleted and not sent.
Note
• To stop automatic redialing, wait until the printer starts redialing, then press the Stop button. •
• To cancel automatic redialing, delete the unsent fax from the printer's memory while the printer is •
on-standby for a redial operation. For details, see Deleting Document in Printer's
278
Memory.