Page 4
VarioLS Power/Menu key, press UP or DOWN key until OFF appears on the display. Press ENTER key to turn the Vario LS OFF. 7 - Restore the VarioLS to factory defaults: Press Power/Menu key, press UP or DOWN key until REST appears on the display. Press ENTER key to restore the VarioLS to factory defaults.
Page 5
Display layout: Max. climb rate: This value indicates the maximum climb rate achieved during the current flight Vario: This value indicates the instant climb/sink ratio. Max. sink rate: This value indicates the maximum sink rate achieved during the current flight. Altimeter 1: Can be used as main altimeter (can be used as ASL altitude).
Page 6
Basic operation: 8-Reset the Vario LS: Insert a paper clip into the dedicated hole on the back of the vario LS. Do not over press the clip and do not use any sharp tip tool. 9 - Updating the Vario LS firmware...
Need help?
Do you have a question about the Vario LS and is the answer not in the manual?
Questions and answers