Advertisement
Why install a DP34 Switch
A DP34 switch allows you to receive signals from two or
three DISH Network satellites, and route these signals to as
many as four DishPro satellite receivers per switch.
DP34 switches allow you to add as many as four DishPro
receivers to your system by adding just one DP34 switch.
What's more, up to three DP34 switches can be connected to
each other, so that you can route the satellite signal from two
or three satellites to as many as twelve DishPro receivers.
Note: Some DishPro receivers have more than one tuner —
for example, the DishPVR 721 receiver has two. In this case,
one DP34 switch can be used to deliver the satellite signal to
two of these receivers, or to one of these receivers and two
DishPro one-tuner receivers.
Introduction
This Guide explains how to install one or more
DP34 Multi-Dish Switch(es). You should use this Guide
along with the DishPro Installation Instructions that are in
the user guide that came with your receiver.
Page 3
Advertisement
