µ-Dimension COMPETITION ProZ2-50 Manual page 9

FEATURES AND CONTROLS
RCA Low Level Input Jacks
lt allows left and right inputs to be connected to the amplifier using RCA plugs.
RCA Line Output Jacks
Full range output from channel L&R inputs is provided at Line Out Jacks.
Input Level Control
It allows for the adjustment of the gain of both channels to match the output level
of the source. In addition, it allows for detailed adjustment with L&R level control
to be separated.
Amplifier X-over switch / Line outs X-over switch
a) LPF : Allows for the control of the low pass frequency range
(30Hz-500Hz) by using the Low Variable Control.
b) FULL : Allows for full range pass through.
c) HPF : Allows for the control of the high pass frequency range
(30Hz-500Hz) by using the High Variable Control.
Subsonic Filter
It admits of removing the frequency below 15Hz to 45Hz using the Subsonic
Variable Control in order to protect subwoofer speaker or to produce
powerful subwoofer sound.
Bass EQ Boost
Adjust the sub boost level of the selected frequency output from 0dB to 12dB.
Remote Gain Control
You can control remote gain, connecting the remote control to amplifier.
Protection LED
lt illuminates when fault condition exists, and amplifier immediately shuts down.
lf illuminated, turn amplifier off, check for shorted speaker leads and DC noise
from RCA input and attempt to re-power amplifier.
When amplifier overheats and thermal protection circuit shuts amplifier down,
LED does not illuminate.
Power LED
lt indicates when amplifier is on and no fault existence.
Speaker Terminal
It allows the connection of speakers to the amplifier.
Fuse
It protects both the amplifier and automobile electrical system from fault conditions.
Power connection
Connects +12VDC power wire from the battery.
Remote connection
Connects the control wire which allows the amplifier to be turned on and off by the
radio cassette player.
Connects ground wire from a suitable ground point on the chassis.