Related Manuals for Philips 207E6
Summary of Contents for Philips 207E6
- Page 1 207E6 www.philips.com/welcome EN User manual Customer care and warranty Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4.1 Resolution & Preset Modes....18 5. Power Management ......19 6. Regulatory Information ......20 7. Customer care and warranty ...27 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..........27 7.2 Customer Care & Warranty ....29 8. Troubleshooting & FAQs ....33 8.1 Troubleshooting ...........33 8.2 SmartControl Lite FAQs ......34... -
Page 3: Important
1. Important • Please use approved power cord provided 1. Important by Philips all the time. If your power cord is missing, please contact with your local This electronic user’s guide is intended for service center. (Please refer to Customer anyone who uses the Philips monitor. -
Page 4: Notational Descriptions
1. Important • Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational • IMPORTANT: Always activate a moving conventions used in this document. screen saver program when you leave your monitor unattended. Always activate Notes, Cautions and Warnings a periodic screen refresh application Throughout this guide, blocks of text may be... -
Page 5: Disposal Of Product And Packing
1. Important From the planning, design and production 1.3 Disposal of product and packing stages, Philips emphasizes the important of material making products that can easily be recycled. At Philips, end-of-life management primarily entails Waste Electrical and Electronic Equipment- participation in national take-back initiatives... -
Page 6: Setting Up The Monitor
User’s Manual 保留备用 Monitor drivers SmartControl software Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. (2) Use your fingers to tighten the screw located at the bottom of the base, and secure the base to the column tightly. -
Page 7: Operating The Monitor
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description AC/DC power input VGA input DVI input Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. - Page 8 On-Screen Display. You can use this as a On-Screen Display (OSD) is a feature in all reference when you want to work your way Philips LCD monitors. It allows an end user to around the different adjustments later on. adjust screen performance or select functions...
- Page 9 2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1600x900@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1600x900@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
-
Page 10: Image Optimization
and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage Lite delivers great optimized monitor performance. Why do I need it? • Standard: Enhances text and dampens... -
Page 11: Smartcontrast
3. Image Optimization 3.2 SmartContrast 3.3 Philips SmartControl Lite The new SmartControl Lite software by Philips What is it? allows you to control your monitor via an easy Unique technology that dynamically analyzes to use on-screen graphic interface. Complicated displayed content and automatically optimizes... - Page 12 3. Image Optimization Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
- Page 13 3. Image Optimization Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input.
- Page 14 3. Image Optimization 2. Start - starts the 6-step color calibration First color Calibration Screen: sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons.
- Page 15 3. Image Optimization menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. • Displays current preference settings. • A checked box enables the feature. The check box is a toggle.
- Page 16 3. Image Optimization Help>User Manual - Will only be active when Context Sensitive menu selecting User Manual from the drop-down The Context Sensitive menu is Enabled by Help menu. On a non-supported display default. If Enable Context Menu has been capable of DDC/CI, only the Help and Options checked in the Options>Preferences pane, then tabs are available.
- Page 17 3. Image Optimization • Technical Support - displays the tech support page. • Check for Update - takes the user to PDI Landing and checks the user’s version against the most current available. • About - Displays detailed reference information: product version, release information, and product name.
-
Page 18: Technical Specifications
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type IPS LCD Backlight Panel Size 19.5" W (49.4cm) Aspect Ratio 16:9 0.271 x 0.271 mm Pixel Pitch Brightness 250cd/m² SmartContrast 20,000,000:1 Contrast Ratio (typ.) 1000:1 Response Time (typ.) 14ms SmartResponse 5ms(GtG) Optimum Resolution 1600x900 @ 60Hz Viewing Angle 178°... - Page 19 Finish Glossy Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 20: Resolution & Preset Modes
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1600x900@60Hz (analog input) 1600x900@60Hz (digital input) Recommended Resolution 1600x900@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 640 x 480 66.67 37.86 640 x 480... -
Page 21: Power Management
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 22: Regulatory Information
• Both product and product packaging is electronic equipment have been adhered to prepared for recycling in order to make Philips monitors safe to use • The brand owner offers take-back options throughout its life cycle. Corporate Social Responsibility Congratulations! • The brand owner demonstrates the... - Page 23 6. Regulatory Infomation EPEAT CE Declaration of Conformity (www.epeat.net) This product is in conformity with the following standards The EPEAT (Electronic • EN60950-1:2006+A11:2009+A1: Product Environmental 2010+A12:2011 (Safety requirement of Assessment Tool) program Information Technology Equipment). evaluates computer desktops, laptops, and monitors based on 51 • EN55022:2010(Radio Disturbance environmental criteria developed through requirement of Information Technology...
- Page 24 6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for (www.energystar.gov) compliance could void the user's authority ® As an ENERGY STAR Partner, we to operate the equipment. have determined that this product Use only RF shielded cable that was supplied ®...
- Page 25 6. Regulatory Infomation nuisibles aux communications radio. EN 55022 Compliance (Czech Republic Only) Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé...
- Page 26 6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht Placering/Ventilation den in der "Verordnung über den Schutz vor VARNING: Schäden durch Röntgenstrahlen" festgelegten FÖRSÄKRA DIG OM ATT HUVUDBRYTARE Vorschriften. OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
- Page 27 6. Regulatory Infomation China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request.
- Page 28 6. Regulatory Infomation 이 기기는 가정용 (B 급 ) 전 자 파 적 합 기 기 로 서 주 로 가정에서 사용하는 것을 목 적으로 하며 , 모든 지역에 서 사용할 수 있습니다 . VCCI-B この装置は、クラス B 情報技術装置です。 この装置は、家庭環境で使用することを 目的としていますが、この装置がラジオ やテレビジョン受信機に近接して使用さ...
-
Page 29: Customer Care And Warranty
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. - Page 30 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 31: Customer Care & Warranty
7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region:... - Page 32 Estonia FUJITSU +372 6519972(workshop) Georgia Esabi +995 322 91 34 71 +36 1 814 8080(General) Hungary Profi Service +36 1814 8565(For AOC&Philips only) Kazakhstan Classic Service I.I.c. +7 727 3097515 +371 67460399 Latvia ServiceNet LV +371 27260399 +370 37 400160(general)
- Page 33 Macau Technology Macau: Sat. 9:00am-1:00pm Ltd. Tel: (853)-0800-987 REDINGTON Tel: 1 800 425 6396 India Mon.~Fri. 9:00am-5:30pm INDIA LTD SMS: PHILIPS to 56677 +62-21-4080-9086 PT. CORMIC (Customer Hotline) Mon.~Thu. 08:30-12:00; 13:00-17:30 Indonesia SERVISINDO +62-8888-01-9086 Fri. 08:30-11:30; 13:00-17:30 PERKASA (Customer Hotline)
- Page 34 7. Customer care and warranty Taiwan FETEC.CO 0800-231-099 Mon.~Fri. 09:00 - 18:00 Axis Computer Thailand (662) 934-5498 Mon.~Fri. 08:30am~05:30pm System Co., Ltd. Technostar Turkmenistan +(99312) 460733, 460957 Mon.~Fri. 09:00 - 18:00 Service Centre Soniko Plus Uzbekistan Private Enterprise +99871 2784650 Mon.~Fri.
-
Page 35: Troubleshooting & Faqs
Philips customer service representative. • Disconnect the monitor from mains power source immediately for safety Common Problems • Contact with Philips customer service No Picture (Power LED not lit) representative immediately. • Make sure the power cord is plugged into... -
Page 36: Smartcontrol Lite Faqs
VGA mode. power LED Setup in OSD main Controls. Image appears blurred, indistinct or too dark For further assistance, refer to the Consumer Information Centers list and contact Philips • Adjust the contrast and brightness on customer service representative. On-Screen Display. -
Page 37: General Faqs
Recommended refresh rate in LCD Function. What can I do? monitors is 60Hz, In case of any Ans.: Philips Service center has a right to ask for disturbance on screen, you can set it legitimate identification and authorization, up to 75Hz to see if that removes the in order to establish ownership of the disturbance. - Page 38 When handling the monitor, PC, workstation or Mac? make sure that there is no pressure or Ans.: Yes. All Philips LCD monitors are fully force applied to the panel surface side. compatible with standard PCs, Macs This may affect your warranty conditions.
- Page 39 8. Troubleshooting & FAQs program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Warning Severe"burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired.
- Page 40 © 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice. Version: M6207E1T...