Advertisement
Turn On Pump
Turn on the pump by pushing the
on switch.
Note: ensure water is flowing
through the system before turning
on the pump to avoid damaging
your pump.
Adjust Pressure
You can adjust the pressure in
two ways:
1. Opening and closing the
bypass valve will lower and raise
the system pressure.
2. The pump pressure can be
controlled by tightening and
loosening the screw on the
bottom of the pump.
Pump
Check that operating pressure is
between 100-130 psi.
Note: running your system in
excess of 130 psi will result in
damage to your filters.
Advertisement
