Advertisement
Available languages
Available languages
Getting started
D
E
(appearance will vary)
F
(appearance will vary)
G
(appearance will vary)
H
I
8
Add Steam (on some models)
Add Steam adds steam into the washer to assist with loosening stains on the Whites,
Colors/Normal, Towels/Sheets, Active Wear, Bulky Items or Sanitize cycles .
To use:
1. Turn power ON and select a wash cycle .
2. Select the Add Steam button to activate steam .
3. Press the Start/Pause button .
Soil
Change the Soil level to increase or decrease the wash time to remove different amounts of
soil .
To change the Soil level, press the Soil level button until you have reached the desired setting .
You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil levels .
Temp
Adjust to select the proper main water temperature for the wash cycle . The PreWash rinse
water is always cold to help reduce energy usage and reduce setting of stains and wrinkles .
Follow the fabric manufacturer's care label when selecting the wash temperature .
To change the wash temperature, press the wash Temp button until you have reached
the desired setting . You can choose between Tap Cold, Cold, Warm, Hot or Extra Hot (Extra
Hot is available on some models) . By design, to protect fabrics, not all wash temperatures are
available for certain wash cycles .
NOTE: The first 10 seconds of the wash fill is always cold . This feature assists in conditioning the
fabric and preventing stains from setting on garments .
Spin
Changing the Spin speed changes the final spin speed of the cycles . Always follow the garment
manufacturer's care label when changing the Spin speed .
To change the Spin speed, press the Spin speed button until you have reached the desired
setting . You can choose between No Spin, Low, Medium, High or Max . Higher spin speeds are
not available on certain cycles, such as Delicates .
Higher spin speeds remove more water from the clothes and will help reduce dry time, but may
also increase the possibility of setting wrinkles on some fabrics .
My Cycle (on some models)
To save a favorite cycle, set the desired settings for wash cycle, soil level, spin speed and wash temp
settings and hold down the My Cycle button for 3 seconds . A beep will sound to indicate the cycle has
been saved .
To use your custom cycle, press the My Cycle button before washing a load .
To change the saved cycle, set the desired settings and hold down the My Cycle button for 3
seconds .
NOTE: When using My Cycle, wash options cannot be modified after the cycle has been
started .
NOTE: If you change wash options with My Cycle before starting the cycle, the My Cycle
light will turn off and you will be returned to the base cycle .
PreWash (on some models)
Prewash is an extra wash before the main wash . Use it for heavily soiled clothes or for
clothes with a care label that recommends prewashing before washing . Be sure to add liquid
or powder high-efficiency detergent, or the proper wash additive to the prewash dispenser .
PreWash must be selected prior to pressing Start .
The PreWash feature will fill the washer with cold water (adding the prewash detergent),
tumble the clothes, drain and spin . Then the washer will run the selected wash cycle .
NOTE: In some special cycles, the prewash is selected automatically as the default . You
can modify this selection at any time .
49-3000065
Advertisement
