Parameter Setting - Ramsond SUNSHIELD PRO User Manual

In addition to panel displays battery type, work model, charge and discharge
status. The user can press the "up" or "down" button to view the parameters of
the controller (battery voltage, load current,PV current, the charge/discharge
capacity of last week)
In manual mode, press the "OK" button to on/off the load.
Note: When Controller fails, the error icon
display on the LCD screen. User can press "up" or "down" button to view details.
E101 load short-circuit
E102 load Overload
E201 Battery over-discharge
E202 Battery Over-charge

Parameter Setting

Press "OK" button Continue for three seconds, the controller will enter the
setup mode.As Figure 4
Figure 3 LCD screen display
Table of Error Code
E203
E301
E302
E401
8
flashes and an error code
Battery Over-temperature
PV over-voltage
PV Over-current
Controller over-Temperature