Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21l
Advertisement
Related Manuals for Fortress Technologies Ultra Quiet Series
Summary of Contents for Fortress Technologies Ultra Quiet Series
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Table of Contents Safety ............2 Maintenance ..........11 Installation ..........6 Parts List and Diagram ......14 Specifications ..........6 Warranty ............ 16 Operation ........... 10 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. - Page 3 3. Personal safety c. Store an idle compressor out of the reach of children and do not allow persons a. Stay alert, watch what you are doing and unfamiliar with the compressor or these use common sense when operating this instructions to operate it.
- Page 4 a. Make sure your extension cord 16. Maintain labels and nameplates on the is in good condition. compressor. These carry important safety information. If unreadable or missing, contact b. Be sure to use an extension cord which Harbor Freight Tools for a replacement. is heavy enough to carry the current your product will draw.
- Page 5 Symbology Pounds per square inch of pressure Double Insulated Cubic Feet per Minute flow Volts Cubic Feet per Minute flow SCFM Alternating Current at standard conditions National pipe thread, tapered Amperes National pipe thread, straight Specifications Electrical Rating 120VAC / 60Hz / 15A Air Outlet Size 1/4"...
-
Page 6: Installation
Installation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch “OFF” and unplug the Air Compressor from its electrical outlet before assembling or making any adjustments to the compressor. - Page 7 Assembly Attach Wheel Spring 1. After unboxing, leave compressor on base inside of Washer tray. Fold down edges of tray and attach Wheels. Flat Wheel Washer 2. Attach Wheels to brackets on Tank, using Axle Bolts (1), Flat Washers (3), Spring Washers (4), and Nuts (5).
- Page 8 Page 8 For technical questions, please call 1-888-866-5797. Item 57336...
- Page 9 Item 57336 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operation
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Compressor Area Set Up 1. Designate a work area that is clean and well-lit. 3. -
Page 11: Maintenance
Automatic Shut off System 1. If the Compressor automatically shuts off 2. Possible causes of repeated automatic before reaching its normal cutoff pressure: shut off of the compressor are: a. Shut off all tools. a. Using an extension cord that is too long or narrow;... - Page 12 Draining Moisture from the Tank The Moisture Drain is located under the Tank. It must be used daily to release all trapped air and moisture from the Tank. Doing this will eliminate condensation and prevent tank corrosion. 1. Turn the Power Switch off. 3.
- Page 13 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
-
Page 14: Parts List And Diagram
Parts List and Diagram Parts List Part Description Part Description Bolt M4×12 Cylinder Head Guard Limit Block Washer Cylinder Head Guard End Cover Screw Retainer Ring Air Filter Soft Pipe Crank Saft Tank Assembly Bolt M8×8 Bolt M12×80 Bearing Washer Connecting Rod Wheel Bolt M5×20... - Page 15 Assembly Diagram Item 57336 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.