Table of Contents
Advertisement
Timer Recording
This Recorder can be programmed to record up to 16
programs within a period of 1 month.
Press HOME.
1 1
The Home menu appears.
Use b / B to select the TV option.
2 2
Use v / V to select the Timer Record option then
3 3
press ENTER.
The Timer Record List will appear.
Use v / V to select the NEW then press ENTER.
4 4
The Timer Record menu will appear.
• Media – Choose a media (DVD or VCR).
• PR – Choose a memorized program number, or
one of the external inputs from which to record.
• Date – Choose a date up to 1 month in advance,
or select a daily or weekly program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a record mode.
DVD: SP, LP, EP, MLP, XP or AT (Auto)
VCR: SP, LP, AT (Auto)
AT (Auto) mode determines how much time is
available on the disc or tape and switches record
mode, if necessary, to complete recording the
program. When you set the VPS/PDC option to
ON, AT mode is not available.
• VPS/PDC – The VPS/PDC system automatically
adjusts the recording time so that even if a pro-
gram is not running to schedule, you won't miss
it. For VPS/PDC to work properly, you must input
the correct announced time and date of the pro-
gram you want to record.
The recommendable recordable DVD discs
DVD-R
DVD+R
Mitsubishi (8x, 16x)
Mitsubishi (8x, 16x)
That's (8x, 16x)
Ricoh (8x, 16x)
SONY (16x)
SONY (16x)
-
-
DVD-RW
Mitsubishi (4x)
Verbatim (4x)
JVC (4x)
-
Victor (4x)
-
Maxell (4x)
Note that VPS/PDC may not work with every sta-
tion.
otes
• Stations that use VPS/PDC typically include
VPS/PDC information in the teletext TV guide
pages. Please refer to these pages when set-
ting a timer recording.
• This recorder takes approximately 20 seconds
to switch on and start recording. This means
that when using VPS/PDC, there may be
instances where the beginning of the program
is not recorded.
Enter the necessary information for your timer
5 5
recording(s).
• b / B (left/right) – move the cursor left/right
• v / V (up/down) – change the setting at the cur-
rent cursor position
• Press RETURN (O) to exit the Timer Record
menu.
• Press RETURN (O) to display Timer Record
List.
Press ENTER to save the program.
6 6
The Timer Record List will appear.
Press RETURN (O) to exit the Timer Record
7 7
List.
Make sure that you load a recordable disc or
8 8
tape and press POWER to switch your unit to
Standby.
otes
• The Timer indicator lights on the front panel display.
(Nothing is displayed while the Power Save Mode is ON.)
• If the Disc and Tape indicator are blinking, either no disc
or tape is loaded, or the loaded disc is not recordable.
• The Recorder will record the audio according to the cur-
rent TV tuner setting (Stereo, Mono or Bilingual).
Use the AUDIO button to set the audio before switching
the Recorder to Standby mode.
•
You must press POWER to stop the Timer Recording.
• The Recorder will automatically power off when the
Timer Recording ends.
If the unit is DVD mode when the VCR timer recording
ends, the unit will not automatically power off.
• There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded
• If you wish to watch the DVD playback during the VCR
timer recording, press DVD (or DVD/VCR) to change to
DVD mode and perform the DVD playback. You cannot
playback the VCR during the DVD timer recording.
DVD+RW
DVD+R(DL)
Mitsubishi (4x)
Mitsubishi (2.4x)
SONY (2.4x)
Maxell (2.4x)
Ricoh (2.4x, 4x)
Verbatim (2.4x)
-
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
-
-
-
-
-
43
.
Advertisement
Table of Contents
