Table of Contents
Advertisement
Before Operation (Continued)
Press HOME.
1 1
The Home menu appears.
Use b / B to select the Setup option.
2 2
While the Start option is selected, press ENTER.
3 3
Press B to move to the second level.
4 4
Use v / V to select the Auto Programming
5 5
option.
Press B to move to the third level.
6 6
Country option is highlighted.
Use v / V to select a country then press B.
7 7
"Start" icon is highlighted.
Press ENTER to begin the channel search.
8 8
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner's memory.
Program Edit (PR Edit in Home Menu)
You can edit a channel manually (add, delete, name,
move, etc.).
Press HOME.
1 1
The Home menu appears.
Use b / B to select the Setup option.
2 2
While the Start option is selected, press ENTER.
3 3
Press B to move to the second level.
4 4
Use v / V to select the Program Edit option then
5 5
press B to move to the third level.
"Edit" icon is highlighted.
Press ENTER.
6 6
Program List menu appears.
20
Use v / V to select a PR number then press
7 7
ENTER.
Program List options appears on the left side of the
menu display.
Use v / V to select an option then press ENTER
8 8
to confirm.
Program Edit: Edits the selected program.
Station Rename: Edits the station name.
Move: Moves the program's location on the pro-
gram list.
Delete: Deletes the program from program list.
Decoder On/Off: Set the decoder for the program
to On or Off.
NICAM Auto/Off: Set the NICAM function to for the
program Auto or Off.
Press RETURN (O) repeatedly to exit Program
9 9
List menu.
Program Edit
You can perform a search to select and store TV chan-
nels manually.
1. Use v / V to select a program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program List menu.
2. Use v / V to select 'Program Edit' option from the
options then press ENTER.
Program Edit menu appears.
3. See the descriptions on below to use Program Edit
menu.
b / B (left/right): Moves the cursor to the previous or
next column.
v / V (up/down): Changes the setting at the current
cursor position.
PR: Indicates program number (display only)
Seek: Searches a station automatically. Use
b / B to select Seek option then press v / V.
Searching stops when the recorder tunes in a
station.
Ch.: Changes the channel number to edit. Use b / B
to select Ch. option then press v / V.
MFT: Changes the frequency for fine tuning.
Use b / B to select MFT option then press v / V.
PAL/SECAM: Changes TV signal system (PAL or
SECAM). Use b / B to select PAL/SECAM option
then press v / V.
4. Choose OK then press ENTER to confirm the setting
and returns to the Program List menu.
Advertisement
Table of Contents
