NEC MultiSync EA241F User Manual page 28

Hide thumbs Also See for MultiSync EA241F:
Table of Contents

Advertisement

No Video
If no video is present on the screen, turn the [ ] key off and on again.
Make sure the computer is not in a power-saving mode (touch the keyboard or mouse).
When using DisplayPort, some display cards do not output video signal under low resolution modes when the monitor is
turned OFF/ON or disconnected/connected from the AC power cord.
When using an HDMI input, please change [OVER SCAN].
Make sure [VIDEO DETECT] is set to [NONE].
No Sound
Make sure the speaker cable is properly connected.
Check to see if mute is activated.
Check the volume level in the OSD menu.
If the input signal is DisplayPort or HDMI, make sure the [SOUND INPUT] in the OSD menu is set to [DISPLAYPORT] or
[HDMI].
Brightness variations over time
Change [AUTO BRIGHTNESS] to [OFF] and then adjust the [BRIGHTNESS].
Change [DV MODE] to [STANDARD] and then adjust the [BRIGHTNESS].
NOTE:
When [AUTO BRIGHTNESS] is set to [ON], the monitor automatically adjusts brightness based on the environment.
When the brightness of surrounding environment changes, the monitor will also change.
When [DV MODE] is set to [DYNAMIC], the monitor automatically adjusts the [BRIGHTNESS].
USB Hub does not operate
Make sure the USB cord is properly connected. Refer to your USB device User's Manual.
Check that the USB upstream port on the monitor is connected to the USB downstream port on the computer. And make
sure the computer is ON.
Human sensor does not work
Make sure there is no object in front of the Human sensor.
Make sure there is no equipment that radiates infrared rays in front of the monitor.
ControlSync does not work
Make sure the ControlSync cable is connected correctly.
Make sure the ControlSync cable is not in "loop" connection.
Master monitor should be connected with ControlSync OUT connector only.
Please use the provided ControlSync cables.
You can use up to five sub monitors via ControlSync.
Displayed OSD menu is rotated
Make sure of the [OSD ROTATION] setting.
English-26

Advertisement

Table of Contents
loading

Table of Contents