Pioneer DMH-WT86NEX Operation Manual page 130

Apple CarPlay
Connection failed.
→ Communication failed and the system is
trying to connect.
→ Wait for a while. Then, perform the
actions below if the error message is still
displayed.
– Restart the iPhone.
– Disconnect the cable from the iPhone,
and then connect the iPhone again
after a few seconds.
– Turn the ignition switch to OFF and
then to ON.
Please attach the GPS antenna in order to
use Apple CarPlay over Wireless.
→ This unit cannot properly detect the
GPS signal from the GPS antenna.
– Check the GPS antenna installation
and connection. For details about the
connection and installation, refer to
the Installation Manual.
The speed sensor is disconnected. Please
attach it.
→ The speed sensor cannot detect any
signal.
– Check the speed signal cable
connection. For details about the
connection, refer to the Installation
Manual.
Please attach the GPS antenna and the
speed sensor in order to use Apple
CarPlay over Wireless.
→ This unit cannot detect the GPS signal
from the GPS antenna and the speed
signal from the speed sensor.
– Check the connection and installation
for both. For details about the
connection and installation, refer to
the Installation Manual.
If the error message is still displayed after
performing the above action, please
contact your dealer or an authorized
Pioneer Service Station.
Android Auto
Android Auto has stopped.
→ The connected device is not compatible
with Android Auto.
– Check if the device is compatible with
Android Auto.
→ The startup of Android Auto failed for
some reasons.
– Disconnect the cable from the
smartphone, and then connect the
smartphone again after a few seconds.
– Restart the smartphone.
– Turn the ignition switch to OFF and
then to ON.
Android Auto has stopped. Please adjust
the time to match that of the Android
phone, or check the screen of your
Android phone when it is safe to do so.
→ The time set in this product or the
smartphone is not correct.
– Set the correct time.
If the error message is still displayed after
performing the above action, please
contact your dealer or an authorized
Pioneer Service Station.
Bluetooth pairing failed.
→ The Bluetooth pairing failed for some
reasons.
– Pair this product with the device
manually.
To use Android Auto, please stop your car
and check your Android phone.
→ The default settings are displayed on
the screen of the Android Auto
compatible device or images are not
output from the Android Auto
compatible device.
– Park your vehicle in a safe place, and
follow the instructions displayed on
- 130 -