Pioneer DMH-WT86NEX Operation Manual page 105

[Input/Output settings]
Menu Item
[USB MTP]
[Off] [On]
[AV Input]
[2nd Camera]* [Maestro]
[Off]
[AUX Input]
[On] [Off]
* DMH-WT8600NEX, DMH-WT7600NEX, DMH-WT86NEX, DMH-WT76NEX, DMH-WC6600NEX, DMH-
W4660NEX, DMH-WC5700NEX
[Camera settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
TIP
The parking assist guidelines can be displayed temporarily on the rear view camera screen by touching
the icon at the top left of the screen. The guidelines can be adjusted. For details on how to adjust the
guidelines, see [Parking Assist Guide Adjust] (page 107).
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the source/application selection
screen (page 48).
NOTES
• To set the rear view camera as the camera for Camera View mode, set [Back-up Camera Input] to [On]
(page 106).
• When using the 2nd camera, set [AV Input] to [2nd Camera] (page 105).*
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.*
* DMH-WT8600NEX, DMH-WT7600NEX, DMH-WT86NEX, DMH-WT76NEX, DMH-WC6600NEX, DMH-
W4660NEX, DMH-WC5700NEX
Description
Select [On] to use the USB MTP (Media Transfer Protocol)
connection.
Select [Off] to use Android Auto.
Select AV input source.
Set to [On] for AUX source (page 93).
- 105 -