Kenwood DDX6906S Instruction Manual page 76

Controlling Audio
[Zone Select]
■
Touch [Single Zone] to turn off the dual
zone function.
[Front Source], [Rear Source]
■
Select an audio source for each.
[Rear VOL.]
■
Adjust the rear source volume.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost (P.76)
– Equalizer Control/ Sound Effect/ Listening
Position (P.74, 76, 77)
– Speaker Setup (P.72)
– High-resolution Sound Source File Playback
• You cannot select iPod as the Rear Source if it is
connected via Bluetooth.
• If you select iPod as the Front Source, you cannot
select DISC or USB as the Rear Source.
• If you select USB as the Front Source, you cannot
select DISC (Music CD/ Disc media) as the Rear
Source.
• If you select DISC (Music CD/ Disc media) as the
Front Source, you cannot select USB or iPod as
the Rear Source.
• If you select Spotify, Pandora, Bluetooth audio,
Apple CarPlay or Android Auto as the Front
Source, you cannot select DISC (Music CD/ Disc
media), USB or iPod as the Rear Source.
Sound Effect
You can set sound effects.
1
Press the [ ]/[MENU] button.
h Popup menu appears. h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Sound Effect].
76
4
Set each parameter as follows.
[Bass Boost]
■
Set the amount of bass boost "OFF"/ "1"/ "2"/
"3".
■ [Loudness]
Set the amount of boost of low and high
tones.
"OFF", "Low", "High"
[Drive Equalizer]
■
Reduces the driving noise by raising the
bandwidth.
"OFF", "ON"
[Space Enhancer]
■
Select the feeling of sound space
enhancement.
"OFF"/ "Small"/ "Medium"/ "Large".
■ [Supreme]
Turn ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-
frequency range that is cut off when
encoding.
■ [Realizer]
Virtually make the sound more realistic using
the Digital Signal Processor (DSP) system.
Select the level from "OFF"/ "1"/ "2"/ "3".
[Stage EQ]
■
You can adjust the height of speakers
virtually to suit your listening position.
"OFF"/ "Low"/ "Middle"/ "High".