Hardware Installation - ICP DAS USA PMDK Quick Start Manual

2. Follow the instructions shown on the screen and
complete the installation.
3
......................................................
H ardware installation
Following steps below to install card:
1. Turn off computer power
2. Open the cover of computer case
3. Choose an unused PCI slot
4. Plug the PMDK card into this slot carefully and
use a screw to fix it
5. Install the cover back
6. Turn on the power supply
Start the computer and enter Windows operation
system, the system will execute the Plug&Play driver.
After the driver is installed, PMDK is ready for testing.
- 2 -