ICP DAS USA PMDK Quick Start Manual

Hide thumbs

......................................................

I ncluded items

One PMDK card ( and some optional cables

and daughter board)

One software installation CD (2010/1/26 or

newer)

......................................................

I nstall Windows drivers

Please execute PMDKsetup.exe which is locate in

CD:\PMDK\setup\WinXP\PMDKsetup.exe

PMDK

Quick Start

e Quick Start Guide (this document)

This windows driver only support Windows XP/NT version

Language

Version

Date

- 1 -

English

V1.0

2010/1/26

Table of Contents

Need help?

Do you have a question about the PMDK and is the answer not in the manual?

Questions and answers

Summary of Contents for ICP DAS USA PMDK

Page 1 Quick Start Version V1.0 Date 2010/1/26 ……………………………………………… I ncluded items One PMDK card ( and some optional cables and daughter board) One software installation CD (2010/1/26 or newer) e Quick Start Guide (this document) ……………………………………………… I nstall Windows drivers Please execute PMDKsetup.exe which is locate in CD:\PMDK\setup\WinXP\PMDKsetup.exe...
Page 2 1. Turn off computer power 2. Open the cover of computer case 3. Choose an unused PCI slot 4. Plug the PMDK card into this slot carefully and use a screw to fix it 5. Install the cover back 6. Turn on the power supply Start the computer and enter Windows operation system, the system will execute the Plug&Play driver.
Page 3 ……………………………………………… in assignments Please refer to the user manuals of PMDK and its daughter boards. 轉接 cable: ……………………………………… elf test PMDK 1. Configuration: Daughter board (optional). For example, DN-8368M) DC 24V power supply. For example, DP-665(optional) Servo motors and drives (optional). For example, MITSUBISHI J2S series) 2.
Page 4 If the drives and motors are not wired to the PMDK card, users can test the read/write of DPRAM. CMD code = 0x2504 is used to clear LP (logical position) and EP (encoder position). Press Exec CMD button while CMD code = 0x2504 to test if the action is OK or not.
Page 5 6. If the DN-8368 is wired to daughter board, change the DA value and measure the output at the daughter board to verify the DA function. The steps are as follows: a) set the DA2 to be 2; b) write 0x2505 to CMD code;...
Page 6 ……………………………………………… eference Information PMDK website: http://www.icpdas.com/products/DAQ/pc_based/pmdk.htm Optional Accessories website: http://www.icpdas.com/products/DAQ/screw_terminal/dn-8368.htm http://www.icpdas.com/products/DAQ/screw_terminal/dn_20m.htm Manuals: CD:\PC_Base\PCI\PMDK\Manual http://www.icpdas.com/products/motion/download%20data/Motion_download_ PMDK.htm Related products: http://www.icpdas.com/products/motion/download%20data/Motion_download_ PMDK.htm (Note: the Motion_download_PCbased has underscore characters.) The main website of ICP DAS: http://www.icpdas.com Professional technical support Agents and ordering information Enhancing device functions...