Table of Contents
Advertisement
PZ-BAT External Battery Pack for the PZ Amplifiers
PZ-BAT Overview
The PZ-BAT external battery pack is used with a PZ amplifier for
long recording sessions. It provides 42 AmpHours and requires
8-10 hours to charge to 95% capacity and 14 hours to fully charge.
Charging the Batteries
A 100-240 VAC, 50-60HZ 2A(MAX) power connection socket is on
the back or the PZ-BAT. Connect to AC power to charge.
Using the External Battery Pack
The DC power output cable on the front panel can be connected
directly to the round female charger socket on the back panel of a PZ amplifier.
Set the three position switch on the front of PZ amplifier to either the A or B position to power
on the PZ amplifier. When the PZ-BAT is connected the PZ's Battery Status LEDs will behave as
if the internal batteries are charging.
Important
To avoid introducing EMF noise, DO NOT connect the PZ-BAT to AC power while connected to a PZ amplifier that
is collecting data.
PZ-BAT External Battery Pack for the PZ Amplifiers | 4
Advertisement
Table of Contents
Need help?
Do you have a question about the PZ-BAT and is the answer not in the manual?