Remote Control 12~13 - Panasonic CS-V9NKA Operating Instructions Manual

REMOTE CONTROL
Maximum distance: 8m
Remote control receiver
Remote
Control display
3
8
9
10
11
V9NKA, V12NKA, V7NWA, V9NKA, V12NKA, V7NWA,
V9NWA, V12NWA V9NWA, V12NWA
V18NKA, V24NKA,
V28NKA, V18NWA
12
Indicator
(Green)
POWER
(Orange)
TIMER
(Blue)
NANOE-G
(Orange/
POWERFUL/QUIET
Green)
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• For cool and dry modes, the range of temperature for
selection is 16˚C ~ 30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
Room
temperature
23˚C & above
Below 23˚C
• Press for "HI" to +2˚C or
standard setting temperature.
COOL mode - To enjoy cool air
1
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
7
DRY mode - To dehumidify the environment
4
• Unit operates at low fan speed to give a gentle cooling
2
operation.
5
4
TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
12
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
up/down automatically.
6
TO ADJUST AIRFLOW DIRECTION (5 OPTIONS)
6
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
Standard setting
Operation mode
temperature
Cool 25˚C
Dry 22˚C
for "LO" to -2˚C to the
POWER