Common Usage Problems And Solutions - Klarstein BEER BELLY Manual

EN
20

COMMON USAGE PROBLEMS AND SOLUTIONS

Common problem
The machine does not start
after the power cord is
plugged in and the switch
is turned on.
When plugged in and
switched on, it can be
cooled and heated, but
the fan does not turn.
The temperature inside the
box increases under the
refrigeration mode.
When plugged in and
switched on, the fan
rotates, but does not cool
or heat.
Does not work when
using the cigarette lighting
machine.
Plug in the switch can
work normally, the
indicator light is not on.
Failure cause
1. The voltage is too low.
2. No electricity.
Cooling fan failure.
Internal cooling chip
installed in reverse.
Refrigeration chip fault.
The plug is not connected
properly.
Control panel indicator
light is out of order.
Suggested solutions
1. Shut down the machine
and restart it when the
voltage is stable.
2. Call the service hotline.
Replace the fan.
Call the service hotline.
Call the service hotline.
Insert the plug as required
Call the service hotline.