Summary of Contents for Legacy Classic Kids 490-8910
Page 1
Assembly Instruction 490-8910 CRIB DRAWER Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS: Please carefully read all instructions before assembling the drawer box kit ...
Page 3
Assembly Instruction 490-8910 CRIB DRAWER Fig (1) 3. Slide the Bottom panel (F) onto the groove of the Left Side Panel (C), Right Side Panel (D) and Back panel (B). Connect these panels together with Cam Nut (J) using Screwdriver to tighten. (See Fig 2) Fig (2) 4.
Page 4
Assembly Instruction 490-8910 CRIB DRAWER Fig (3) 6. Turn the whole unit back side up and insert the same Bolts (H) through the Bottom Side Panel (F) into the Divider panel. Also, install the Caster (K) into the Bottom panel (F) with Wooden screw (L) using Screwdriver.
Assembly Instruction 490-8910 CRIB DRAWER Fig (5) NOTE: This Crib drawer could also be used on a Convertible Crib or Toddler bed CARE INSTRUCTIONS: Dust often using a clean, soft, dry lint-free cloth. Blot spills immediately, and wipe with a clean, damp, cloth.