Old position of grease point on post
New position of grease point on end of saddle
ADAPTOR BRACKET ASSEMBLY
Remarks:
• Check for wear on pin adaptor
• Visual inspect weld condition
• Check bushes for wear
• Check pin is ok, free from warping
Severe wear to pin
Wear to adaptor
• Check for wear to post
• Grease
IMPORTANT!
GREASE DAILY
SADDLE ASSEMBLY
Remarks:
• Visual inspect saddle for cracks
• Check sandwich mounts for splits / damage
• Check bump stops for damage
Wear to bush
When EMV is lifted, check there is no
more than a 1mm gap here. A gap could
mean wear to bearing or thrust washer