Dawson EMV-300 Operator's Instructions/Spare Parts List page 38

PRE-DELIVERY INSPECTION SHEET
EMV'S, VPC'S AND EMD'S
EMV550 EMV450
Serial No:
Photo taken before dispatch:
SADDLE ASSEMBLY
Sandwich Mount Condition
Buffer Stop Condition
Top Swivel Condition
Max gap 1mm
(ideally no play)
Greased
Maximum gap allowed due to wear.(see photo)
Check using a crowbar to force apart assembly, then
insert a feeler gauge at least 20mm into gap, if more
than 1mm change lifting bolt and nut immediately and
check other components replacing as required.
Remarks:
GEARBOX ASSEMBLY
Oil Level
Leaks (Visual)
Case Breather Valve
Motor Blow off Valve
General Condition
Remarks:
Stand:
Remarks:
Cycle Clamp x5 to Check Function
Close Clamp Stop Vibro & Leave for 5 mins (CLAMP MUST STAY CLOSED)
Run Vibro and Check for External Leaks
Inspection Time / Date:
MACHINE TYPE
EMV400 EMV300
ADAPTOR BRACKET / QUICK HITCH ASSEMBLY
Adaptor Pin
Bushes List
Additional Spares Supplied
VIBRO RUNNING CHECKS
EMV70 VPC
Diameter
Hoses Condition
Spring Guard Condition
Running Leaks
Fittings
Additional Spares Supplied
Remarks:
CLAMP ASSEMBLY
Serial No.
Static Jaw Condition
Moving Jaw Condition
Greased
Chain Clamp (Serial No.
Lifting Chain (Serial No.
Coupler (Serial No.
Remarks:
Hoses
Fittings
Motor Blow Off Valve
QRC
Inspector Name:
EMD140 EMD70
Length
HOSES
)
)
)