Advertisement
Potentiometer Diagnostics (Enable/Disable):
This procedure will enable or disable the handle potentiometer diagnostics. This is usually enabled to
allow the system to detect potentiometer failures.
1. Press the sync button five times, the take and sync LEDs will flash.
2. Press the warm button once, you have now selected potentiometer diagnostics configuration.
3. Press the sync button until the desired diagnostics configuration is displayed on the LEDs as
follows:
4. When the desired diagnostics configuration is displayed on the LEDs, press the warm button to
store it in memory. This will return you to the main menu (4 LEDs flashing).
AFTER
11/27/05
DO NOT USE and DESTROY
Potentiometer diagnostics disabled: indicated by no LEDs.
Potentiometer diagnostics enabled: indicated by take LED.
CHP configuration 4button v3.1 10-8-04 REV 1
Page 3 of 4
Advertisement
