Bauhn ASPP8-0421-W User Manual

Have you got everything?
1 Power On/Off Switches
Press to supply/cut off power to the outlets.
2
Active Power LED Indicator
When lit, the green light indicates that the
powerboard is active and ready for use.
3
Surge Protected LED Indicator
When lit, the red light indicates that all
connected devices are surge protected.
4
Overload Circuit Breaker (Resettable)
Protects against current overload at 10 amps.
5
USB Charging Ports
For charging phones, tablets or other devices.
6
AC Sockets
All 8 sockets are the same protected sockets
and can be used interchangeably.
7
TV Line Protection
Protects the TV line against power surges.
Troubleshooting
No power
output from
one of the
sockets
No power
output from
any of the
sockets
No output
from the USB
ports
Powerboard is
not turning on
The TV cable
signal is weak,
or there is no
signal at all
What? You mean this User Guide didn't have ALL the answers? Speak to us!
We'd love to help you get up and running as quickly as possible.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Enjoy using your powerboard!
Well done, you made it.
Now sit back and relax... your powerboard is automatically
covered by a 1-year warranty.
How nice!
Unpack the box and make sure all
of these items are there:
A. 8-Way Surge Powerboard
B. User Guide
C. Warranty Certificate
• Try other sockets. If the other sockets have power output, it's probably
the contact of one faulty socket that is loose or not connected; avoid
using that socket.
• Check that the power switch is turned on (you can try to turn it on and off
a few times to make sure it's switched on) and that the Active Power LED
Indicator is lit green.
• Check the overload circuit breaker button to see whether it's tripping,
push it down to reset the circuit breaker.
• Make sure the input socket for the powerboard has power output.
• Check that the USB cable is connected securely to the USB port and/or
try a different USB port.
• The total output current for the USB ports are 2.1A. Remove devices
using the other USB ports.
• Use another USB cable.
• Check that there is no visible damage to the plug or cord.
• Ensure that the devices connected do not exceed the total maximum
load (2400W, 10A). If exceeded, unplug the devices and press the
overload reset button.
• Check the two cable connectors are firmly connected to the ANT-IN
and ANT-OUT ports (located on underside of powerboard) ; you can try
unplugging them and then plugging them back in; also turn the cable
connector clockwise or counterclockwise to help make better contact for
the connectors.
• Disconnect the cable and connect your TV directly to the wall ANT
socket to make sure its not an issue with the source signal.
Call our After Sales Support on 1300 886 649.
User Guide
Model: ASPP8-0421-W, ASPP8-0421-B
8-Way Surge Powerboard
Note: only one powerboard
(white/black) is supplied
Product Overview
1
2
3
4
6
7
Give us a call
.