Mini Video Light - Canon PICTBRIDGE DC220 Instruction Manual

Options
(auto)
The flash fires automatically according to
the brightness of the subject.
(red-eye reduction, auto)
The flash fires automatically according to
the brightness of the subject. The assist
lamp lights up to reduce the red-eye effect.
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
1
If the joystick guide does not appear
on screen, press (
2
Push the joystick (
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display the
joystick guide in the illustration above.
When the mode switch is set to AUTO,
only one joystick guide will appear.
• Repeatedly push the joystick ( )
toward to cycle between the flash
modes.
• The display
seconds.
3
Press PHOTO , first halfway to
activate the autofocus and then
fully to record the still image.
NOTES
The practical range of the flash is approx. 1 to
2 m (3.3 to 6.6 ft.). The range depends on the
recording conditions.
The range of the flash decreases in
continuous shooting mode.
For the red-eye reduction to be effective, the
subject needs to look at the assist lamp. The
Default value
NEXT
) to display it.
) toward .
disappears after 4
degree of reduction depends on the distance
and on each individual.
The flash will not fire in the following cases:
- When you manually adjust the exposure in
(auto) or (red-eye reduction) mode.
- During auto exposure bracketing.
- In the [ FIREWORKS] recording program.
The flash mode cannot be selected when the
exposure is locked.
We recommend not using the flash
while the optional Wide-converter is attached;
its shadow can appear on the screen.
About the AF-Assist Lamp: While you press
halfway, if the subject is too dark the
PHOTO
assist lamp may light up briefly in order to
enable the camcorder to focus more accurately
(AF-assist lamp). You can also set [AF AST
LAMP] to [ OFF] so the assist lamp does
not light up.
- The camcorder may not be able to focus even
if the AF-assist lamp is on.
- The brightness of the AF-assist lamp could be
an inconvenience. Consider turning it off in
public places such as restaurants or theaters.

Mini Video Light

You can turn on the mini video light
(assist lamp) at any time regardless of the
recording program.
1
If the joystick guide does not appear
on screen, press (
2
Push the joystick (
• If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display the
joystick guide in the illustration above.
When the mode switch is set to AUTO,
only one joystick guide will appear.
• appears on the screen.
Other Functions 65
( 12)
NEXT
) to display it.
) toward .