Magnifying Photos During Playback - Canon PICTBRIDGE DC220 Instruction Manual

42 Playback
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the zoom
lever toward W to extend the green
selection frame to the whole page, and
move ( ) between index pages.
Move the zoom lever toward T to return
to moving between single images.
3
Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
T
O RUN THROUGH THE STILL IMAGES
Push the joystick (
it pressed down to run quickly through
the still images.
T 10 100
O SKIP OR STILL IMAGES
1
If the joystick guide does not appear
on screen, press (
2
Push the joystick (
3
Select ( ) [
or [ JUMP 100 IMAGES].
4
Jump ( ) the number of images
selected.
Press ( ) to close the image jump
screen and display the image. You can
press ( ) again to hide the joystick
guide.
) or ( ) and hold
) to display it.
) toward .
JUMP 10 IMAGES]

Magnifying Photos during Playback

During playback, still images can be
magnified up to 5 times.
1 Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification to less than 2 times,
move the zoom lever toward W.
• will appear for images that cannot
be enlarged.
2
Select the part of the image to be
magnified with the joystick.
• Move ( ,
of the image you want to see enlarged.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
( 12)
Zoom lever
Joystick
) the frame to the part