Connecting The Tv To The Internet - Sharp LC-48CFC6002KF User Manual

CONNECTING THE TV TO THE INTERNET

When you fi rst power on your new SMART TV there will be an option to follow various on-screen set up
instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please follow
these simple steps below:
Connecting your TV with a wireless connection
1) Press Menu on the remote control (fi g.1).
2) Scroll through the menu, select 'Settings' then enter the 'Network' menu.
3) in the 'Network' menu, example below, scroll down and select 'Wi-fi Confi g' (fi g.2).
4) Within the 'Wi-Fi confi g' options, highlight and select 'Wi-Fi Auto Search'.
5) The TV will then automatically search for networks.
6) Select the preferred type of network connection then enter the network password.
(Please note passwords are case sensitive and must be entered exactly as shown).
7) The TV will then establish a connection.
Note: An icon will appear in the top right hand side of the 'Application' menu to show you if the TV is
connected to the internet.
Connecting your TV with an Ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
2) Press Menu on the remote control. (fi g.1)
3) Scroll through the menu, select 'Settings' then enter the 'Network' menu.
4) In 'Network Confi gurations', select 'Cable'.(fi g.2).
5) Set will automatically confi gure itself.
6) Exit the menu by pressing 'EXIT' on the remote control.
fi g.1
OK
Ethernet
port
fi g.2
Connecting the TV to the Internet
19 19