Table of Contents
Advertisement
Menu Operation
Privacy Setting
This function is aiming at the protection of personal pri-
vacy, selecting a screen part black not to be displayed in
the screen. Up to 8 zones can be registered.
1.
Select [PRIVACY] option.
Use [LEFT] or [RIGHT] button to select a [ON] and
.
press [SET]. The PRIVACY SETUP menu appears.
.
Use [LEFT] or [RIGHT] button to select a mask (AREA1
~ AREA8) on the [MASK NUMBER].
.
Use [LEFT] or [RIGHT] button to set up the ON or OFF
on the DISPLAY option.
Use [LEFT] or [RIGHT] button to set up the GRAY,
5.
WHITE or BLACK on the COLOR option.
6.
Use [UP] or [DOWN] to select an option then use
[LEFT] or [RIGHT] button to adjust the option.
•
HEIGHT: Enlarge or decrease the vertical size of
the mask.
•
WIDTH: Enlarge or decrease the horizontal size of
the mask.
•
MOVE Y: Moves vertical position of the mask.
•
MOVE X: Moves horizontal position of the mask.
Note:
The parts with the registered mask numbers from AREA1 to
AREA have the same color. (So do the parts with the num-
bers from AREA5 to AREA8). If you change the mask color,
the registered mask color will be changed automatically
with the same color for each of group (AREA1~, AREA5~8).
Advertisement
Table of Contents
