Connecting Day&Night Switch - LG LSX701 User Manual

Connections
Contact Ratings
• Maximum load current is
±10mA.
• Do not connect any sys-
tem or device that has
over 0 Vp-p (DC 0 V)
bias voltage on the con-
tact terminal.
Note:
Use a relay unit if the voltage or current of the con-
nected device exceeds the ratings.
1
Connecting Day&Night Switch
Connect the external D&N switch to the D&N terminal.
ALARM
COM
Equivalent
Diagram
External D&N
Switch
Day function
When you open the external switch, the D&N function
is set to Day mode.