Table of Contents
Advertisement
Quick Links
GUILD
200W 1/3 Sheet Sander
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild 1/3 sheet sander
These instructions contain important information that will help you get the best from your Guild
1/3 sheet sander, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
PFS200G
Advertisement
Table of Contents
Related Manuals for Guild PFS200G
Summary of Contents for Guild PFS200G
- Page 1 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your Guild 1/3 sheet sander These instructions contain important information that will help you get the best from your Guild 1/3 sheet sander, ensuring it remains safe to operate.
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................6 Accessories........................6 Operating Instructions....................7 Working Hints For Your 1/3 Sheet Sander..............11 Maintenance......................11 Trouble Shooting......................11 Technical Data......................12 Environmental Protection..................13 Guarantee........................14 Declaration of Conformity..................14 Plug Replacement (Uk & Ireland Only)..............15 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the 1/3 sheet sander. To reduce the risk of injury. - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
-
Page 6: In The Box
In The Box Parts On/Off Switch Sanding Paper Clamp Dust Collection Box Base Plate Dust Outlet Accessories Dust box Sanding paper (2x80 grit & 2x100 grit) Customer Helpline 0333 3201989... -
Page 7: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for dry sanding of wood, plastic, filler and coated surfaces. 1. FITTING THE SANDING PAPER SANDING PAPER WITH HOOK & LOOP SYSTEM FIT THE SANDING PAPER (SEE FIG A) The sanding papers are placed directly onto the base plate. - Page 8 Operating Instructions SANDING PAPER WITHOUT HOOK & LOOP SYSTEM (SEE FIG B , C , D) FIT THE SANDING PAPER Fit the sanding paper over the base. Make sure the sanding paper is even with the edges and that the dust collection holes in the base and sanding paper is aligned and that the sanding paper is taut on the base.
- Page 9 Operating Instructions 2. USING THE Dust Collection BOX (SEE FIG E) A) ATTACH THE DUST BOX Your sander is equipped with a Dust Collection Box (2), which is designed for collect dust task. Insert the Dust Collection Box into the rear dust outlet of sander. Then pull the Dust Collection Box and make sure it is tightened securely on the dust outlet.
- Page 10 Operating Instructions 5. USING THE SANDER The workpiece to be sanded must be secured. If it is small or it may move during sanding, it must be held in a vice or suitably clamped. Be sure to hold the sander firmly whilst it is on and apply it gently to the work, it may “kick”...
-
Page 11: Working Hints For Your 1/3 Sheet Sander
Working Hints For Your Sander 1. Your sander is useful for working on wood, metal, painted surface. It will smooth surfaces prior to painting, even where fillers have been used and left proud. 2. Your sander is best suited to large flat areas such as doors but can also be used on skirting boards, windows, etc, provided they are accessible. -
Page 12: Technical Data
Technical Data Technical Data Table Voltage 230-240V~50Hz Power input 200W No load speed 12000/min Dimension of base 90*187mm Orbital dia. 1.3mm Protection class Machine weight 1.51kg Noise Information A weighted sound pressure : 72.7dB(A) A weighted sound power : 83.7dB(A) &... -
Page 13: Environmental Protection
Technical Data Vibration Information Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 10 C or less. -
Page 14: Guarantee
Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 200W 1/3 Sheet Sander model number PFS200G fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/ EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and... -
Page 15: Plug Replacement (Uk & Ireland Only)
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.