Page 1
Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your Guild 1/4 sheet sander These instructions contain important information that will help you get the best from your Guild 1/4 sheet sander, ensuring it remains safe to operate.
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the 1/4 sheet sander. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection...
Page 4
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Page 5
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for dry sanding of wood, plastic, filler and coated surfaces. 1. CHANGING THE SANDING PAPER SANDING PAPER WITH HOOK & LOOP SYSTEM FIT THE SANDING PAPER (SEE FIG A1) The sanding papers are placed directly onto the base plate.
Page 8
Operating Instructions clip back into the retaining position. Check that the paper is flat to the base plate, if not, release either clip and reposition the paper before resetting the clip. Switch on momentarily to check that the sander is functioning correctly. If there is undue vibration, repeat the paper positioning procedure.
Page 9
Operating Instructions To empty the dust box, pull off the dust box out of the dust extraction outlet directly and shake out dust. 3.USING THE DUST OUTLET (SEE FIG F) Your sander is equipped with a 35mm dust outlet, which are designed for connecting the hose of a vacuum cleaner.
Operating Instructions allow you to achieve the best quality sanding finish. Coarse grit will remove the most material and finer grit will give you the best finish in all sanding operations. The condition of the surface to be sanded will determine which grit will do the job.
Trouble Shooting 1.If your sander will not operate, check the power at the mains plug. 2.If the sander does not abrade surface, check the sanding paper. If the sanding paper have been worn, replace the new paper and try again. The paper must be kept in a dry place;...
Technical Data Technical Data Table Voltage 230-240V~50Hz Power input 200W No load speed 13000 /min Base size 110 X 103mm Orbital dia 1.0 mm Protection class Machine weight 1.44 Kg Noise Information A weighted sound pressure : 79.1dB(A) A weighted sound power : 90.1dB(A) &...
Technical Data Vibration Information Helping to minimize your vibration exposure risk. ALWAYS use sharp chisels, drills and blades Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 10 C or less Plan your work schedule to spread any high vibration tool use across a number of days.
Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 200W 1/4 Sheet Sander model number PPS200G fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/ EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and...
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.