Shop fox D4160 Instruction Sheet

Model D4160
120V ON/OFF
Paddle Switch
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
To reduce risk of serious burns, electrocution
or death when installing this switch:
• Only use this switch to replace an existing
machine switch that has the same physical
configuration and equivalent electrical
specifications/ratings.
• Installation must only be performed by an
electrician or qualified service personnel,
and all applicable electrical codes must
be adhered to.
• Turn OFF and completely disconnect all
power sources to the machine before
installing the switch.
• Do not use this switch in wet or damp
locations, or near explosive fumes or
flammable liquids. It is not sealed or
rated for these environments.
• Make sure there is a verified machine
ground on the circuit this switch is
installed.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
#16595TS
COPYRIGHT © MAY, 2014 BY WOODSTOCK INTERNATIONAL, INC.
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Figure 1. D4160 ON/OFF Paddle Switch.

Introduction

The Model D4160 features a recessed ON ( — )
button that can be disabled with a padlock,
and a large OFF paddle used for fast shut-off.
The switch assembly will mount on a standard
electrical box, or over a 1" x 2" opening.

Specifications

Rated HP .......................................
Rated Voltage ................................... 120V
Rated Current .................................... 16A
Padlock Shaft Size ...............................
⁄ HP
1
2
⁄ "
3
16
Printed in China